Combined Multi Light- and Advanced Bordcomputer Module for BMW 3 series (E46), all modell years
It is possible to use this Advanced Bordcomputer-Module also with this module: AIO-Verdeckkomfortmodul
Requirement: Prerequisite is a original BMW radio system with RDS features or a original BMW navigation system. A bordcomputer with available "BC-button" is also required.
Features of the Multi Light-Module:
Comfort indicator
Cornering Light
Daylight
US-Indicator
Coming Home
Home Light
Close Light
Window / sunroof remote
Emergenzy stop Hazard
Chirp module
Comfort Indicator: Just tip at the flashing lever and the indicator will flash three times.
Cornering Light: If the headlight is active and you use the indicator both fog lights will be turned on for a few seconds. This features works up to a speed of 40 km/h.
Daylight: After starting the engine the daylight will be tunred on automatically if the headlight is switched off. As daylight you can use foglights, headlight, indicaotr (US-Light) and taillight or any combination of them.
If the headlight will be activated by BMW light automatic the daylight will be turned off.
Coming Home: After driving with headlight and turning off the ignition first and then the headlight, this feature will light up for a setup time. At the setup menu you can choose between light, headlight, high beam, fog lights, indicator, taillight or any combination of them. You can also change the active time between 15 and 75 seconds.
Home Light:
If you open the car by original key remote the Home Light will be activated for 15-75 seconds. At the setup menu you can choose between light, headlight, high beam, fog lights, indicator, taillight or any combination of them. You can also change the active time between 15 and 75 seconds.
Close Light: This feature is the same as Home Light only when closing.
Window / sunrrof remote: Push two times at the original key remote and the windows / sunroof will be opened automatically. At the setup menu you can choose which windows / sunroof should be opened if you push on the remote.
Emergenzy Stop Hazard: If you are driving more than 60 km/h and make an emergency brake the hazard signal will be turned on automatically for seven seconds to warn the cars behind you.
Chirp module: It is possible ut use an external horn (not included; 12V+, max. 500mA) for an acoustic signal when the car will be opened or locked by original key remote. At the setup menu you can choose if this feature should work on opening, closing or both. If you unlock it will sound one time. If you lock it will sound two times.
Features of Advanced Bordcomputers:
Functionality:
For activating the Advanced Bordcomputer push and hold the "BC-Button" for one second until the starttext will be showen on the display. Use the "BC-Button" to scroll through the menu. For deactivating the Advancd Bordcomputer push and hold the "BC-Button" for one second again. Now you can use the "BC-Button" for standard BMW navigation.
These features are integrated:
Battery voltage (0,1 V steps) - Example of display: "Batt: 12.1V"
Speed display (2 km/h steps; display in km/h or mp/h) - Example of display: "V:60 km/h"
Engine speed (100/s steps) - Example of display: " RPM: 800"
Acceleration (100mG/s steps) - Example of display: A: 200 mG"
Cooling water temperature (1°C steps) - Example of display: "Water: 90°C"
Oil temperature (1°C steps) - Example of display : "Oil: 80°C" - built in oil sensor required !
Distance counter (0,1km steps) - Example of display : "KM:2,3 km"
This featues counts the driven distance. By entering the key the counter wil set on 0 and the last trip saved. With the intervall wheel at the whiperlever you can navigate between the actual and four saved trips.
Time (1 Min steps) - Example of display : "Time: 12:10"
By entering the key the counter wil set on 0. At the display you can always see the actually time.
Installation: The installation can be done by yourself. A detailed, illustrated manual shows the installation step by step.
Delivery:
Modul BMW 3 series (E46) Advanced Bordcomputer / Multi Light Module (ABC-ML)
Connection material
Detailed, illustrated manual
Technical data: Voltage: 8-18V DC Power consumption: <1mA Standby / max. 70 mA Use
Temperature: -40 °C bis +85 °C Dimensions: (B x T x H): 68 x 58 x 24 mm
